Orange peel represents approximately 30-40 g/100g of the fresh fruit weight and could be used to develop value-added products. Hence, this study aims to evaluate the effects of drying conditions on the physical properties of orange peel impregnated with sucrose solution. The response surface method (RSM) was used to optimize two parameters: drying temperature (35-55 ºC) and air flow rate (2-3 m/s). The measured responses used to determine the effect of dying process conditions were: moisture content. drying time. total soluble solids. color and hardness. The dried orange peels from the optimal process were subjected to a sensory test by 60 consumers. The optimum conditions for the drying of orange peels were determined to obtain minimum hardness, moisture content and drying time for a w values below 0.6. The optimum conditions were found to be a dying temperature of 52.3 ºC and air flow rate of 2.0 m/s. At this point, drying time, hardness and moisture content were found to be 20 h, 78.4 N and 7.6%, respectively. The sensory results showed that consumers aged over 30 years old accepted well the dried orange peel.

Deformability modulus, hardness, cohesiveness and adhesiveness of cassava dough reconstituted from precooked flour were evaluated using a lubricated compression test and texture profile analysis. Cassava parenchyma processed under different cooking conditions and left at either -5ºC or -20ºC for 24 h was used to make flour, which was reconstituted into dough. As temperature decreased to -20ºC during the storage period of cooked parenchyma, deformability modulus, hardness and cohesiveness of dough increased significantly. The temperature during the storage period was the most important factor affecting the textural properties of cassava dough.